Vol. 10 No. 1 (2018)

Editorial

• Editorial Preface

  Al Emran Ismail, Zawawi Daud, Nabilah Ibrahim

  • PDF 451
  • Abstract View  742

• Concrete Incorporated With Optimum Percentages of Recycled Polyethylene Terephthalate (PET) Bottle Fiber

  Shahiron Shahidan

  • PDF 2821
  • Abstract View  2484

• Utilization of Water Turbidity Meter Devices in Estimating the Aggregate Stability of Many Artificially Stabilized Soils

  Ghazi Maleh Mutter

  • PDF 837
  • Abstract View  655

• Laminated Veneer Lumber (LVL) Sengon: An Innovative Sustainable Building Material in Indonesia

  Ali Awaludin, Shahiron Shahidan, Achmad Basuki, Sharifah Salwa Mohd Zuki, Fadzli Mohamed Nazri

  • PDF 1523
  • Abstract View  1572

• A Comparative Evaluation of Snow Depth and Snow Water Equivalent Using Empirical Algorithms and Multivariate regressions

  Arash Adib, Arash Zaerpour, Ali Motamedi

  • PDF 623
  • Abstract View  471

• A New Method towards Achieving FES-Induced Movement

  Mohammed Ahmed

  • PDF 582
  • Abstract View  489

• Non-Destructive Oil Palm Fresh Fruit Bunch (FFB) Grading Technique Using Optical Sensor

  Sebastian Liban Utom, Elmy Johana Mohamad, Ruzairi Abdul Rahim, Noorfarahane Yeop, Hanis Liyana Mohmad Ameran, Herdawatie Abdul Kadir, Siti Zarina Mohd Muji, Jaysuman Pusppanathan

  • PDF 1253
  • Abstract View  1051

• Optimization of Alkali Treatment Condition On Tensile Properties of Kenaf Reinforced Polyester Composite Using Response Surface Method

  Mohd Hilmi Othman, Mohd Yussni Hashim, Azriszul Mohd Amin, Ng Chuan Huat, Omar Mohd Faizan Marwah, Muhammad Akmal Johar, Ezazul Fahmee Ahmad Jamal

  • PDF 880
  • Abstract View  791

• Electric Power generation crisis in Nigeria: A Review of causes and solutions

  Ikuobase Emovon, Olusegun David Samuel, Chinedum Ogonna Mgbemena, Michael Kanisuru Adeyeri

  • PDF 2756
  • Abstract View  1795

• Lifetime Analysis on Centrifugal ID Fan Foundation in Cement Plants

  Hamid Eskandari-Naddaf, Morteza Gharouni-Nik, Amir Pakzad

  • PDF 992
  • Abstract View  472

• Leachate Treatment Using Up-Flow Anaerobic Sludge Blanket System

  Mohd Baharudin Ridzuan, Zawawi Daud, Zulkifli Ahmad, Ab Aziz Abd Latiff, Halizah Awang

  • PDF 686
  • Abstract View  645

• Performance Evaluation of User Independent Score Normalization Based Quadratic Function in Multimodal Biometric

  NORDIANA MUKAHAR, Bakhtiar Affendi Rosdi

  • PDF 527
  • Abstract View  443

• Parallel Processing of Image Segmentation Data Using Hadoop

  Nishat Akhtar, Junita Mohamad Saleh, Clemens Grelck

  • PDF 930
  • Abstract View  724

• Gas Chromatography Analysis of a C1-C5 Hydrocarbon Column

  Rais Hanizam Madon, Mas Fawzi, Shahrul Azmir Osman, Ahmad Jais Alimin, Mohd Azahari Razali, Muhamad Khairul Ilman Sarwani, Zulhelmy ZinilAbeden

  • PDF 1024
  • Abstract View  1074

• Numerical Simulation in Transient Flow of Non-Newtonian Fluid in Nozzles

  Azmahani Sadikin, Mohd Khairul Anam Mohd Bahrin, Azzura Ismail, Al Emran Ismail, Sufizar Ahmad, Salihatun Md Salleh, Mohd Nasrull Abdol Rahman, Azwan Sapit, Sallehuddin Shah Ayop

  • PDF 981
  • Abstract View  1046

• A Novel Approach for Adsorption of Copper(II) Ions from Wastewater Using Cane Papyrus

  Mohammed jaafar Al-atabi

  • PDF 637
  • Abstract View  488

• Investigation of the Bearing Capacity of Foundations on Encased Stone Columns Using Finite Element Method

  Hassan Kardgar

  • PDF 1144
  • Abstract View  672

• TiO2 Based Dye-Sensitized Solar Cell Prepare by Using Spray Pyrolysis Deposition (SPD)

  Syafa Syahirah Taib, Mohd Khairul Ahmad, Nafarizal Nayan, Fariza Mohamad, Soon Chin Fong, Amira Saryati Ameruddin, Faridah Abu Bakar

  • PDF 611
  • Abstract View  590

• High performance 8-bit approximate multiplier using novel 4:2 approximate compressors for fast image processing

  Fatemeh Ranjbar, Yahya Forghani, Davoud Bahrepour

  • PDF 942
  • Abstract View  745

• A Comparative Study of Turbulence Models on Aerodynamics Characteristics of a NACA0012 Airfoil

  Azmahani Sadikin, Nurul Akma Mohd Yunus, Saiful Anuar Abd Hamid, Al Emran Ismail, Salihatun Md Salleh, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Sallehuddin Shah Ayop

  • PDF 4070
  • Abstract View  2644

• Thermal Gradient Pattern of Shallow Pitting Via Active Thermography – Hot Water and Steam.

  Maznan bin Ismon, Al Emran bin Ismail, Muhd. Hafeez bin Zainulabidin, Fazimah binti Mat Noor, Hanani binti Abd Wahab, Zaleha binti Mohamad, Mohd Amran bin Madlan

  • PDF 465
  • Abstract View  511

• Application of response surface methodology (RSM) to optimize COD and ammoniacal nitrogen removal from leachate using moringa and zeolite mixtures

  Zawawi Daud, Mahmoud Hijab Abubakar, Mohd Arif Rosli, Mohd Baharudin Ridzuan, Halizah Awang, Ruwaida Aliyu

  • PDF 939
  • Abstract View  1152

• Investigate How Construction Waste Generation Rate is Different for Every Types of Project in Peninsular Malaysia using Site Visit Method

  Shivaraj Subramaniam, Abd Halid Abdullah, Sasitharan Nagapan, Kumanan Kupusamy, Haritharan Manian, Zawawi Daud

  • PDF 1195
  • Abstract View  1103

• Detecting Beef Tallow adulteration in Palm Oil with NIR Spectroscopy and Chemometrics Analysis

  Mohd Fared Abdul Khir

  • PDF 678
  • Abstract View  543

• Automated Feature Description of Renal Size Using Image Processing

  Musab Sahrim

  • PDF 501
  • Abstract View  1045

• Machinery/service system Scheduled Replacement time determination: A combine Weighted Aggregated Sum Product Assessment, Additive Ratio Assessment and Age Replacement Model approach

  Ikuobase Emovon, Chinedum Mgbemena

  • PDF 783
  • Abstract View  733

• The Development of Expeller for Kernel based Seed and its Oil Characterization

  Olusegun David SAMUEL, Ikuobase Emovon

  • PDF 887
  • Abstract View  623

• Automated Feature Description of Follicle Size in Assisted Reproductive Treatment

  Irneza Ismail

  • PDF 419
  • Abstract View  338

• Automatic feature description of Endometrioma in Ultrasonic images of the ovary

  Wan Zakiah Wan Ismail

  • PDF 486
  • Abstract View  402

• Crushing Performances of Axially Compressed Woven Kenaf Fiber Reinforced Cylindrical Composites

  Al Emran Ismail, Azamahani Sadikin, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Salihatun Md. Salleh, Sufizar Ahmad, Mohd Baharudin Ridzuan

  • PDF 743
  • Abstract View  798

• Influence of Silver (Ag) Addition on the Morphological and Thermal Characteristics of NiO-SDC Carbonate Composite Anode

  Ng Kei Hoa, Hamimah Abd.Rahman, Mahendra Rao Somalu

  • PDF 669
  • Abstract View  476