Vol. 2 No. 2 (2021): RPMME

Articles

• Characterization and Review of Dual Composite Cathodes LSCF-SDC/YSZ-SDC for Intermediate to Low Temperature Solid Oxide Fuel Cell

  Hamimah Abd.Rahman, Sharmine Wani Zakirah Shaifull Zaman

  1 - 10

  • pdf 425
  • Abstract View  286

• Development of Drainage Cleaning Machine with Virtual Simulation

  Hao Wei Chai, Noormaziah Jafferi

  11-20

  • pdf 1244
  • Abstract View  676

• The effect of cryogenic cooling condition on surface defect when end milling carbon fibre reinforced polymers

  Jenn Leong Wee, KAMARUDDIN KAMDANI

  21-31

  • pdf 221
  • Abstract View  188

• Performance and Emissions of Vehicle Fueled with Different Blend of Euro 5 Biodiesel

  Nurjihan binti Aimi, Mas Fawzi Mohd Ali

  32-40

  • PDF 303
  • Abstract View  170

• The Evaluation for Accuracy of Non-Destructive Testing (NDT) in Ultrasonic Inspection on Mild Steel Material by Ultrasonic Testing Thickness Measurement (UTTM)

  Nur Artisya Zulkipli, Eliza M Yusup

  41-47

  • pdf 894
  • Abstract View  665

• Finite Element Analysis of Solid and Vented Disc

  SYED ABDUL AFIQ WAN SAKAWI, Al Emran Ismail

  48-56

  • pdf 476
  • Abstract View  172

• Case study of solar PV comparison cost saving at student accommodation.

  Ching Yong Ku, Zamri Noranai

  57-63

  • pdf 777
  • Abstract View  494

• Innovative Design of Practical Tools for Umrah Training by Using QFD and TRIZ.

  MUHAMMAD IQBAL ADAM, PM Ts Dr Musli Mohammad, Mohd Shahir Yahya

  64-71

  • PDF 237
  • Abstract View  175

• Minimization of Airtime in Machining Process Using Non-Conventional Method

  Christina Law Boon Hui, Haslina Abdullah

  72-78

  • pdf 193
  • Abstract View  178

• Corrosion Under Insulation (CUI): The Absorption Characteristics of Rockwool

  Shivalingam Sethulingam, Azzura Ismail

  79-87

  • pdf 417
  • Abstract View  235

• A Study of the Performance of the Local Exhaust Ventilation System at Welding Station using Computational Fluid Dynamics (CFD) Simulation

  Ahmad Redzuan Yahya, Hanis Zakaria

  88-95

  • pdf 448
  • Abstract View  581

• Evaluation of Flexural and Flame Retardant Properties of Recycled Polyethylene Terephthalate – Silica Sand Composites

  Iman Nur Sazniza Johari, Nur Azam Badarulzaman

  96-103

  • pdf 197
  • Abstract View  180

• Numerical Study of Drilling Process Using Finite Element Method

  Muhamad Afiq Abdul Aziz, Haslina Abdullah

  104-111

  • pdf 394
  • Abstract View  251

• The Effect of Single Edge Notch Bend (SENB) Specimen Geometry to Fracture Properties of Aluminium Alloys Using Simulation Analysis

  Anas Alias, Noradilla Abdul Latif

  112-120

  • pdf 906
  • Abstract View  735

• A Review of Wear and Corrosion for Carbide-Coating on Different Method: HVOF Thermal Spray and Electrodeposition Method

  Muhammad Zamir Zakwan Mazlan, Zakiah Kamdi

  121-129

  • PDF 278
  • Abstract View  186

• Simulation Approach of End Milling Process Based on Finite Element Method

  MUHAMMAD NUR ARIFF ZULKIFLI, HASLINA ABDULLAH

  130-136

  • pdf 371
  • Abstract View  232

• Study on UAV Performance using eCalc Software

  Mohammad Shahrulnizam, Siti Juita Mastura Mohd Saleh

  137-141

  • pdf 578
  • Abstract View  231

• A Study of Finite Element Analysis For The Thermal Distribution of Friction Stir Welding

  Eric King, Rosli Ahmad

  142-150

  • pdf 194
  • Abstract View  189

• Design of Scraper Conveyor for Palm Oil Mills Industry

  Tzer Xuan Ng, Chee Kiong Sia

  151-156

  • PDF 1883
  • Abstract View  582

• Study of Comfort Temperature for Bowling Activity at Bowling Centre of Batu Pahat Pacific Mall

  YEO HAN YONG YEO, AHMAD FU'AD Idris

  157-168

  • pdf 173
  • Abstract View  157

• Simulation Analysis of Uncoated Tungsten Carbide in Turning Process for AISI 1045 Carbon Steel

  Benny Benedict, Muhammad Faisal Mahmod

  169-177

  • pdf 258
  • Abstract View  192

• Development of Rice Husk Reinforced Aluminium Chips Based Composite By Direct Recycling of Hot Press Forging

  Chuan Yang Chai, Shazarel Shamsudin

  178-188

  • pdf 214
  • Abstract View  178

• ASHRAE Global Thermal Comfort Database II: Comparison of Thermal Comfort Conditions in Different Type of Building

  Mohammad Safwan Bin Roni, Azian Hariri

  189-200

  • pdf 404
  • Abstract View  287

• Lepironia Articulata as a Sustainable Acoustic Absorber

  Nur Hidayah Ahmad Shafii, Muhd Hafeez Zainulabidin

  201-212

  • pdf 275
  • Abstract View  325

• Mechanical Behaviour Of Coir Fibre Reinforced With Polyester Composite

  MUHAMMAD NUR FADHLIUDIN JAMALUDDIN, MOHD YUSSNI HASHIM

  213-219

  • pdf 397
  • Abstract View  148

• Effect of Atmospheric Corrosion Toward Corrosion under Insulation (CUI)- A Case Study

  Ruvanraj Letchumanan, Dr. Fazimah Binti Mat Noor

  220-226

  • pdf 261
  • Abstract View  228

• Mechanical Properties of Recycle Polymers Reinforcement with Glass Fiber Composite Material

  Muhammad Fareed Hafizuddin Md Fadil, M.Yusni

  227-234

  • pdf 332
  • Abstract View  216

• Composite Material for Morphing Wing Skin Application – A Numerical Analysis

  Xin Yi Wong, S Kanna Subramaniyan

  235-243

  • PDF 553
  • Abstract View  392

• Investigation of Reliability on Structural Analysis on Oil Pan Bolt Feeder Machine: A Short Review

  Rafiq Hazim, Ahmad Hamdan Ariffin

  244-256

  • PDF 226
  • Abstract View  181

• Development of Magnetic Field Energy Generator

  AZFARRIDZWAN MUSZAFFARSHAM, Shahrul Azmir Osman

  257-266

  • PDF 1958
  • Abstract View  1507

• Tribology Effect On Turning Machine Process Using Jatropha Oil With AC Nanoparticle

  Ariff Azizi Zolkefli, Norfazillah Talib

  267-273

  • PDF 221
  • Abstract View  168

• Study of the Effect of Different Building Material on Human Comfort: Case study in Naturally Ventilated Badminton Court

  Kai En Tan, Ahmad Fu'ad Bin Idris

  274-284

  • PDF 922
  • Abstract View  369

• The Performance Investigation of Darrieus Wind Turbine with Adjustable Rotor Diameter Penyelidikan Prestasi Turbin Angin Darrieus dengan Diameter Rotor Boleh Laras

  ARIF ASYRAF ABDUL RAZAK, MOHD FADHLI ZULKAFLI

  285-297

  • PDF 381
  • Abstract View  255

• Review on Zeolite Mesoporous Structure: To Keep Nutrient for Fertilizer Purposes

  Amiratul Husna Azmi, Zawati Harun

  298-305

  • PDF 152
  • Abstract View  198

• Understanding on Train Driver Behaviours Using On-Train Data Recorder (OTDR)

  Nurul Husna Razali, Mohd Azlis Sani Md Jalil, Mohd Zamani Ngali

  306-310

  • PDF 236
  • Abstract View  204

• Empirical Mathematical Model of Multiple Interaction Cracks

  Muhammad Najmi Che Ariffin, Muhammad Khairudin Awang

  311-317

  • PDF 164
  • Abstract View  162

• Investigation on Structural Behaviors of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) Using Finite Element Method

  Heng Hoo Lim, Ahmad Mubarak Tajul Ariffin

  318-333

  • PDF 190
  • Abstract View  191

• Fused Deposition Modeling(FDM) Custom Internal Filling Structural Mechanics Simulation

  Sabri Japrin, Mustaffa Ibrahim

  334-342

  • pdf 306
  • Abstract View  212

• Risk Assessment of Occupational Safety & Health (OSH) Hazards at Small and Medium (SME) Enterprise (SME) Industries

  NOR LAILA HANUM SAMIN, DR. MOHD NASRULL BIN ABDOL RAHMAN

  343-353

  • PDF 1078
  • Abstract View  574

• Physiochemical, Mechanical and Antibacterial Properties of Sodium Alginate/Copper Oxide BioComposite Film for Wound Healing Applications

  IYLIA IZZATI JAMAL, MAIZLINDA IZWANA IDRIS

  354-361

  • PDF 180
  • Abstract View  153

• Development of Mechanical Casing Structure of SWAD (Signal Warning Detector)

  Muhammad Amir Raauf Abdul Rashid, Suhaimi bin Hassan

  362-370

  • PDF 159
  • Abstract View  153

• Fabrication of Alginate and Hydroxyapatite Biocomposite Film for Tissue Regeneration Application

  Nurul Izza Mashahdi, Maizlinda Izwana Idris

  371-379

  • PDF 263
  • Abstract View  180

• Modelling Numerical Simulation of DP590 Steel Undergoing Finite Strain Deformation of Uniaxial Tensile Test

  N.M. Zin, M.K.Mohd Nor, M.F.Kamarulzaman, M.S.A.Samad

  380-389

  • PDF 135
  • Abstract View  159

• Zinc Oxide Nanoparticle Synthesize by Green Approach

  Muhamad Fariza Rashid, Ainun Rahmahwati Ainuddin

  390-398

  • PDF 186
  • Abstract View  155

• Investigation on the Air Filter with Industrial Ducting System

  Muhammad Aiman Nasri, Mohamad Farid Sies

  399-405

  • PDF 238
  • Abstract View  207

• A Study On Chip Formation Using Minimum Quantity Lubrication (MQL) Technique

  Ahmad Raziq An-Nasr Nasri, Dr.

  406-413

  • PDF 315
  • Abstract View  140

• ASHRAE Global Thermal Comfort Database II: Thermal Comfort of Mechanically Ventilated and Naturally Ventilated Office Building

  Nur Muhammad Aidil Mahat, Azian Hariri

  414-425

  • PDF 185
  • Abstract View  137

• Prediction Of Surface Roughness and Tool Wear from The Machined Surface by Machine Vision Approach

  Lee Chia Shen

  426-432

  • Abstract View  166

• Simulation study on the material stress distribution respect to different angle of ECAP

  Akmalia Shahira Kamaruddin, Mohd Nizam Katimon

  433-441

  • PDF 268
  • Abstract View  234

• Identification of Malay Rattan Properties for Furniture Application

  Noraina Izzati Musa, Shahruddin Mahzan

  442-451

  • PDF 697
  • Abstract View  459

• Review of The Effect of Neodymium and Ytterbium on Microstructure and Mechanical Properties of Magnesium Alloy

  Nazatul Nazuhah Roslan, Rosli Ahmad

  452-457

  • PDF 153
  • Abstract View  175

• Investigation of Polyvinyl Alcohol/Clove Essential Oil Property as a Repellent against Corn Leaf Aphids (Rhopalosiphum Maidis F.)

  MUHAMMAD SAFIUDDIN BIN ROSTAM, MUHAMAD ZAINI BIN YUNOS

  458-472

  • PDF 242
  • Abstract View  155

• Predicting Acoustic Properties In Enclosure Using Neural Network

  AHMAD IRFAN ZULKIFLI

  473-478

  • PDF 169
  • Abstract View  134

• Impact Velocity on Seashell Structure Reinforced Carbon Fiber Using Numerical Simulation

  Nadhirah MatZin, Kamarul Azhar Kamarudin

  479-488

  • PDF 176
  • Abstract View  135

• Investigation Mechanical Characterization of Rattan Under Chemical Treatment

  Ammar Yahaya, Shahruddin Mahzan

  489-499

  • PDF 419
  • Abstract View  267

• Investigation of Directly Print Pattern on Synthetic Leather Material

  THAJUL MYDIN SEENI IBURAHIM, RD KHAIRILHIJRA KHIROTDIN

  500-509

  • PDF 190
  • Abstract View  209

• Vibration Characteristics of Engine Support Bracket Using Finite Element Analysis

  Muhammad Akmalhakim Kamarul Zaman, S Kanna Subramaniyan

  510-522

  • PDF 434
  • Abstract View  299

• Ballistic Limit of Double Layered Cockleshell Reinforced Carbon Fiber using Numerical Simulation

  Siti Nuraisha, Kamarul Azhar Kamarudin

  523-532

  • PDF 184
  • Abstract View  162

• System Development of an Autonomous Lawnmower System Using Ardupilot Mission Planner

  MUHAMMAD SYAZWAN AZIZI ABDUL RAHIM, Ts. Dr. MUHAMMAD AKMAL JOHAR

  533-538

  • PDF 592
  • Abstract View  428

• Investigation of Curing Process of Silver Conductive ink on Polymer Substrates using Halogen Lamp and Oven

  Siti Nur Elida Eraman, Rd Khairilhijra’ Khirotdin

  539-546

  • PDF 520
  • Abstract View  177

• An Automatic System for Fishpond Ecology Monitoring and Control

  muhammad raimie razam, ZAZULI MOHID

  547-556

  • PDF 270
  • Abstract View  270

• Development of A Material Efficiency Assessment Tool for Metal Stamping Product

  Muhd Fauzan Hakim Ruslan, Ho Fu Haw

  557-568

  • PDF 203
  • Abstract View  144

• Design of A Vertical Conveyor System for Scrap Rubber in FGV Felda Rubber Industry

  TECK SENG KERK, mohd azwir azlan

  569-579

  • PDF 485
  • Abstract View  220

• Design of Natural Cooling system Using Well Water

  EDMAN JUDE, ZAMRI NORANAI

  580-589

  • PDF 182
  • Abstract View  178

• Influences of Chemical Treatment on Mechanical Properties of Rattan

  Nur Muhammad Mohamad Toni, Prof. Dr. Shahruddin Hj. Mahzan @ Mohd Zin

  590-598

  • PDF 394
  • Abstract View  267

• A Review on Chip Formation Characteristics Under Dry and Flood Cutting

  Haiqal Ungku

  611-618

  • PDF 373
  • Abstract View  157

• Simulation and Analysis of Airflow in ACMV System at G3 Building UTHM

  Aiman Bahrin, Ir Dr Sri Yulis

  619-627

  • PDF 307
  • Abstract View  239

• Design and development of an experimental rig to evaluate the performance of air-conditioner refrigerants

  Isma Nur Hafizi Ismail, Sulastri Sabudin

  641-650

  • PDF 535
  • Abstract View  176

• Simulation of Thermal Energy Storage Stratified Water Storage Tank for Solar Heating System

  amin faiq ahmad daud

  651-657

  • PDF 304
  • Abstract View  171

• The Biomechanics Analysis: Development of Biomechanics Analysis Algorithm With OpenPose Motion Capture System

  Chan Yung Wai, Mohd Zamani Bin Ngali

  658-668

  • PDF 417
  • Abstract View  335

• A Simulation of Cutting Parameters Influence on Drill Bit and Surface Temperature in Dry Drilling of S45c Carbon Steel

  Junlloyd Egano

  669-677

  • PDF 343
  • Abstract View  182

• THE Design of Fire Fighting Sprinkler System by Autodesk Revit

  Kugkan Santha kumar

  678-684

  • PDF 1236
  • Abstract View  461

• The Evaluation for Accuracy of Non-destructive Testing (NDT) in Ultrasonic Inspection on Stainless Steel Material by Ultrasonic Testing Thickness Measurement

  Nurhusnina Iskandar, Ir. Dr. Eliza M Yusuf

  685-692

  • PDF 598
  • Abstract View  378

• The Assessment of Pocket Mask Fit Among Malaysian Citizen

  Muhamad Shahnizam Mohd Hayati, Helmy Mustafa El Bakri

  693-700

  • PDF 143
  • Abstract View  160

• Commercial Gas Turbine Performance Analysis for Aviation Industries

  Muhammad Shahrir Arief Khairul Anuar, Mohammad Fahmi Abdul Ghafir

  701-709

  • PDF 601
  • Abstract View  308

• Fluttering Effect of 3D Printing Part

  MUHAMMAD DANIAL, SITI JUITA MASTURA

  710-719

  • PDF 148
  • Abstract View  195

• Fabrication of Sustainable Sand Brick with An Additive of Elastomer Type Waste Material

  MOHD SYAHRIL ASHRAF ABDUL RAHMAN; said ahmad

  730-741

  • PDF 244
  • Abstract View  232

• A Review on Assessment Quality of Fruits using Non-destructive Method

  Win Leong Kok, Ong Pauline

  742-760

  • PDF 535
  • Abstract View  252

• Numerical simulation on lateral collapse of bamboo foam composite in hollow cylindrical tube subjected to quasi static loading

  Noor Ekmal Hakim Bin Mohamad Noor Noor, zaleha mohamad

  761-767

  • PDF 238
  • Abstract View  166

• Effects of Inlet Velocity of a Bubble Column Reactor on the Fluid Flow Pattern for Biodiesel Production

  SATHIS RAJAH, nurul fitriah nasir

  768-774

  • PDF 165
  • Abstract View  170

• Machinability Performance Of Titanium Alloy When Using Modified RBD Palm Oil Dielectric Fluid In Electrical Discharge Machining Process

  Muhammad Shazwan Ishak, Said Ahmad

  775-787

  • PDF 248
  • Abstract View  202

• Behavioural Investigation On Table Tennis Blade Structure Using Finite Element Analysis

  Muhamad Amir Ezzat Muhamad Jais, Ahmad Mubarak Tajul Arifin

  788-802

  • PDF 557
  • Abstract View  217

• Numerical Study of Airflow Effect on Temperature

  Mohammad Fazlan Harun, Norasikin Mat Isa

  812-820

  • PDF 159
  • Abstract View  180

• A Comparison of Sound Level Monitoring Using Android-Based Smartphone Applications With The Actual Sound Level Meter

  Eileen Meretha Linggam, maznan ismon

  831-838

  • PDF 496
  • Abstract View  301

• Experiment of Natural Cooling system Using Well Water

  EDMAN JUDE, zamri noranai

  839-847

  • PDF 221
  • Abstract View  117

• The Physical Characteristics of Handmade soap with Plant-Based Additives

  Hazim Hosni, Anika Zafiah Mohd Rus

  848-859

  • PDF 2960
  • Abstract View  578

• Analysis on Lighweighting Approach Topology Optimization Design for Additive Manufacturing (DfAM)

  Muhammad Ikmal Ismail, mustaffa ibrahim

  860-868

  • PDF 266
  • Abstract View  216

• Effect of V-Shaped Side Groove on Shear Lip Formation of Aluminium Alloy 6061 by Charpy Impact Test using Finite Element Analysis

  Muhammad Syabil Muhammad Syafiq Suresh, mohd azhar harimon

  869-876

  • PDF 179
  • Abstract View  179

• The Effects of U-Shaped Side Groove on the Fracture Properties of Aluminium Alloy 6061 using Finite Element Method Analysis

  Muhammad Haiqal Mohd Radzi, mohd azhar harimon

  877-884

  • PDF 236
  • Abstract View  171

• Study on Dynamics Characteristics of Multilayer Plates Impacted by Hemispherical Projectile

  Muhamad Norhaziem Noryuzleen Azam, mohd norihan ibrahim

  892-900

  • PDF 226
  • Abstract View  173

• Process Modelling of Friction Stir Welding of Aluminium Alloys AA6061 and aa5083

  Nor Shafiena Mohd Hatta, shazarel shamsudin

  901-911

  • PDF 213
  • Abstract View  154

• Performance Comparison of Mussel and Clam Shell Wastes As An Abrasive Agent Under Different Tooth Brushing Parameter

  Irna Syafika Hassan, shahmir hayyan sanusi

  912-921

  • PDF 823
  • Abstract View  561

• Design Of A Horizontal Conveyor System For Scrap Rubber In FGV Pasir Besar

  Muhammad Nazmi Izzuddin bin Mahamud, mohd azwir azlan

  929-939

  • PDF 330
  • Abstract View  192

• Tensile and Fatigue Test Simulation Analysis for Al 2017 and Al 2024

  Carlson Nailon, muhammad faisal mahmod

  940-947

  • PDF 894
  • Abstract View  273

• A Study Review on Spinel as Interconnect Coating for Solid Oxide Fuel Cell (SOFC)

  Muammar Syamim Hamizan Mohd Hisham, mohd azham azmi

  948-954

  • PDF 362
  • Abstract View  290

• A Study Review Between Ss430 And Crofer 22 Apu Solid Oxide Fuel Cell (Sofc) Interconnect After Spinel Coating Produced By Electrophoretic Deposition

  ARFIZAN KAHA, mohd azham azmi

  955-963

  • PDF 341
  • Abstract View  398

• Effects Of Peat Soil Carbon As Reinforcement On The Microstructure And Density In Recycled Aluminium Chips AA6061

  MOHAMAD EZZUAN BIN MOHD RAES, mohammad sukri mustapa

  964-971

  • PDF 195
  • Abstract View  164

• The Comparison Of Cooling Load Calculation Using Manual Method And Hourly Analysis Program

  Sunder Saragasan, mohamad farid sies

  972-981

  • PDF 1798
  • Abstract View  380

• Modelling of Corrosion Under Insulation for Piping System

  RASHIDATUNNUR MOHD JAMIL, salihatun md salleh

  982-987

  • PDF 309
  • Abstract View  164

• A Study On Aerodynamic Shape of Fin of Model Rocket using Computational Fluid Dynamics (CFD)

  Mohammad Hisham Shahir bin Noor Azman

  988-996

  • PDF 2830
  • Abstract View  1701

• Two-Dimensional Numerical Study of Two Slot Jets Impinging On Flat Surfaces at Various Angles

  MUAZ MOHD ZAHIDIN, suzairin md seri

  997-1002

  • PDF 178
  • Abstract View  152

• A Study on Aerodynamic Effect of a Generic Car Spoiler Using Computational Fluid Dynamics (CFD)

  Lokman Hakim Shafee, Azwan Sapit

  1003-1008

  • PDF 512
  • Abstract View  172

• Crack Propagation Simulation Using Ansys For Bamboo Composites

  Muhammad Faris Fauzan Bin Abd Jalil, zaleha mohamad

  1009-1016

  • PDF 402
  • Abstract View  341

• THE Investigation of Proximate Analysis of Coal and Coconut Shell

  Sharvin Ramesh, NORASIKIN MAT ISA

  1017-1022

  • PDF 451
  • Abstract View  177

• A Pest Monitoring System for Agriculture Using Deep Learning

  MUHAMMAD SYAHIR AFIQ BIN FAISAL

  1023-1034

  • PDF 516
  • Abstract View  296

• Arena Simulation Training Guide for Simple Call Center

  Nur Amirah Ilyana Razali, salleh ahmad bareduan

  1035-1041

  • PDF 1319
  • Abstract View  504

• Conceptual Design of a Small Helicopter

  Ahmad Razin Azli, mohd fauzi yaakub

  1042-1054

  • PDF 626
  • Abstract View  230

• Simulation of Flexible Link Aerator and Control with PID Using Ziegler Nichol’s Method

  Abdul Hakim Mohammad Noor

  1055-1062

  • PDF 172
  • Abstract View  165

• The Corrosion Under Insulation (CUI) Monitoring: Prediction of CUI Using Electromagnetic Wave

  Vun Kiat, Clement Yong, azzura ismail

  1063-1068

  • PDF 457
  • Abstract View  241

• Finding Sound Absorption Coefficients On Porous Absorber Material by Using COMSOL Simulation and Impedance Tube Method

  MUHAMMAD IFFZAN IMAN ISMAIL, latifah md ariffin

  1069-1078

  • PDF 1143
  • Abstract View  571