Vol. 5 No. 1 (2024): RPMME

Articles

• Evaluation of Stability between Conventional Femoral Stem and Short Stem in Total Hip Arthroplasty

  Muhammad Syahrul Ashraff Said, Haslina Abdullah (Author)

  1-7

  • Abstract View  78
  • PDF 142

• Design and development PolyLactic Acid (PLA) recycling machine for 3D printer

  Sia Chee Kiong, Amali Firdaus Saini (Author)

  8-11

  • Abstract View  133
  • PDF 281

• Impact Behaviour of Existing Bicycle Helmet Subjected to Drop Test

  Mohamad Irfan Farhan Mohd Nawi, Mohd Norihan Ibrahim @ Tamrin (Author)

  12-23

  • Abstract View  109
  • PDF 162

• Investigation of pump and motor healthiness based on vibration analysis at uthm biodiesel plant

  Rafie Bahrin, Norrizal Mustaffa (Author)

  24-34

  • Abstract View  108
  • PDF 189

• Simulation Study of Flange Characteristic at Various Operating Condition

  Amirul Iezlan Ismail, Norrizal Mustaffa (Author)

  35-48

  • Abstract View  118
  • PDF 222

• Humerus Compression Plate Analysis Using ANSYS Software

  Khairun Nisa Mahfuzah Haidir, Al Emran Ismail (Author)

  49-57

  • Abstract View  117
  • PDF 123

• Prediction of Tool Wear by Machine Learning Method in Turning Process

  Nor Aziera Azman, Lee Woon Kiow (Author)

  58-69

  • Abstract View  132
  • PDF 285

• The Development of Pineapple Leave Fibre Composite Material for Marine Application Using Hand Lay-Up Method

  Muhammad Iqmal Aizat Majibul Rahman, Ahmad Hamdan Ariffin (Author)

  70-78

  • Abstract View  203
  • PDF 338

• Modal Analysis of a Cantilever Beam with Various Material Using ANSYS

  Danavicknesvaran M Sekhar, Zaleha Mohamad (Author)

  79-86

  • Abstract View  244
  • PDF 308

• Study of Carbon Fiber Layout Orientation Effect on Joining with Aluminium

  Muhammad Hidayat Azman, Mohd Nizam Katimon (Author)

  87-91

  • Abstract View  105
  • PDF 113

• Thermodynamic Stability of Polysulfone/Zinc Salt Membrane

  Aliff Ikram Nor Azmi Tarmizee, Muhamad Zaini Yunos (Author)

  92-99

  • Abstract View  84
  • PDF 94

• Improvising the Design of Optical Geometric Experiment Apparatus for Pre-University Physic Course

  Adzra Ibrahim Abdul Yatim, Salleh Ahmad Bareduan, Mohd Sharin Abdul Karim, Choo Ley In, Abdul Ghani Mohamad Dewa (Author)

  100-109

  • Abstract View  279
  • PDF 206

• The Effect of Binder on Bioceramic Surface Roughness when Milling using Ball Nose End Mill

  Amin Suffian Suleiman, Noor Hakim Rafai (Author)

  110-117

  • Abstract View  81
  • PDF 114

• Design a Portable Lifting Machine for Transfer Heavy Bricks in Construction Sites

  Nurul Nazihah Jamil, Mohd Azwir Azlan (Author)

  118-129

  • Abstract View  550
  • PDF 444

• Acoustic Performance of Upcycled Materials: Plastics & Cigarette Buds in Laminate Composites

  Ganahcan Nair R Sivakumar, Muhd Hafeez Zainulabidin (Author)

  130-139

  • Abstract View  137
  • PDF 138

• Performance Evaluation of 3D Equipment Model for Laboratory Fume Hoods

  Muhammad Syazwan Mustafah, Muhamad Zaini Yunos (Author)

  140-148

  • Abstract View  144
  • PDF 116

• Determination of Rice Husk Silica Effect on SOFC SDC'S Electrolyte Through Material Properties Characterization

  Haziq Irham Azam, Mohd Azham Azmi (Author)

  149-155

  • Abstract View  115
  • PDF 148

• Numerical Simulation of Corrugated Core Sandwich Construction for Biomedical Applications

  Kreeshanthini Gobalan, S Kanna Subramaniyan (Author)

  156-168

  • Abstract View  75
  • PDF 92

• Comparative Analysis of Coil and Jacketed Heating Vessels: A Study on Thermal Efficiency and Economic Viability

  Alif Aiman Mohamad Alim, Norrizal Mustaffa (Author)

  169-179

  • Abstract View  218
  • PDF 606

• Crash and Impact Analysis of Light Vehicle Against Traffic Light Pole

  Puvanithan Raguraman, Mohd Norihan Ibrahim (Author)

  180-191

  • Abstract View  161
  • PDF 290

• Development of Economic Analysis Program Via Matlab’s App Designer

  Muhammad Nur Izzat Zaini, Rosli Asmawi, Zamri Noranai (Author)

  192-199

  • Abstract View  111
  • PDF 178

• Line Balancing Study and Analysis at a Tractor Assembly Line

  Shakilla Nur Asimah Mat Hussin, Salleh Ahmad Bareduan (Author)

  200-208

  • Abstract View  159
  • PDF 275

• Effect of Bed Temperature and Extruded Height on 3D Printed PLA Mechanical Properties

  Muhamad Faris Mohd Hisam, Mohd Azham Azmi (Author)

  209-206

  • Abstract View  228
  • PDF 260

• Fabrication and Physiochemical Properties of Alginate and Natural Aloe Vera Biofilm for Wound Healing Applications

  Simresan Baskaran, Maizlinda Izwana Idris (Author)

  217-222

  • Abstract View  98
  • PDF 142

• Effect of Carbon Reinforcement on the Properties of Seashell Ceramic Composite

  Mohamed Nasrul Mohamed Hatta, Yeh Jia Ren, Kamarul Azhar Kamaruddin (Author)

  223-230

  • Abstract View  82
  • PDF 137

• Fabrication of Rice Husk Through Compaction Techniques for Water Filter Application

  Jemima Fae James, Sufizar Ahmad, Nurul Ain Shuhada Othman , Siti Sarah Sofia Mustpha@Mustapha (Author)

  231-237

  • Abstract View  198
  • PDF 133

• Rice Husk Silica Ceramic Water Filter System

  Siti Sarah Sofia Mustpha @ Mustapha, Sufizar Ahmad, Jemima Fae James, Nurul Ain Shuhada Othman (Author)

  238-243

  • Abstract View  246
  • PDF 193

• Characterization of Rice Husk Silica Foam Fabricated by Slurry Method for Water Filter Application

  Nurul Ain Shuhada Othman, Sufizar Ahmad (Author)

  244-249

  • Abstract View  210
  • PDF 164

• Effects of Various Calcination Times and Temperatures on Zinc Oxide as Gas Sensing For Volatile Organic Compound

  Suraini Abdullah, Ainun Rahmahwati Ainuddin @ Nordin (Author)

  250-258

  • Abstract View  108
  • PDF 123

• Fabrication and Physiochemical Properties of Alginate and Honey Biofilm for Wound Healing Applications

  Fatin Amirah Yusop, Mohamad Hasshim Mohd. Sabirin, Maizlinda Izwana Idris (Author)

  259-268

  • Abstract View  168
  • PDF 157

• Investigating on Effect of Salt as a Moisture Absorbent on the Performance of Moisture Energy Generator

  Md Arif Hossain, Muhamad Zaini Yunos (Author)

  269-275

  • Abstract View  215
  • PDF 115

• A Case Study for Potential Process Improvements in the Briquette Industry

  Ahmad Hazly Ahmad Zainuddin, Mohd Yussni Hashim (Author)

  276-282

  • Abstract View  231
  • PDF 135

• Effect of Square Head Tooltip and Joining Speed on Aluminium Alloy AA6061 in Friction Stir Welding

  Denilson Owen Anak Bujang, Rosli Ahmad (Author)

  283-288

  • Abstract View  89
  • PDF 107

• The Optimum Powder Loading of Different Binder Ratio Between HDPE and RWL as Binder in Metal Injection Molding

  Muhamad Faiz Zamri Zamri, Azriszul Mohd Amin (Author)

  289-296

  • Abstract View  95
  • PDF 109

• The Optimum Powder Loading of Different Binder Ratio Between LDPE and RWL as Binder in Metal Injection Molding

  Muhammad Aminin Umair Badrul Hisham, Azriszul Mohd Amin (Author)

  297-303

  • Abstract View  132
  • PDF 148

• Friction Stir Welding of Dissimilar Aluminium Alloys for Marine Applications.

  Nor Asyikin Mohd Yusof, Shazarel Shamsudin (Author)

  304-317

  • Abstract View  137
  • PDF 156

• A Numerical and Experimental Investigation for Deposition of Conductive Ink on Multiple Substrate with Different Surface Energy and Ink Surface Tension

  Mohamad Hannan Asyraf Hasnul Fauzi, Muhammad Najmi Zainal, Rd Khairilhijra Khirotdin, Wan Muhamad Syakir Wan Zaini (Author)

  319-326

  • Abstract View  112
  • PDF 137

• Study of the Effect of 6S Implementation on Hazard in the FKMP UTHM Workshop

  Anastasia Meg Lim Yin, Rosli Asmawi (Author)

  327-332

  • Abstract View  91
  • PDF 113

• Experimental Study on Water Filtration System by Using Clay-Kenaf-Biochar for Agriculture Uses

  Ku Muhammad Iskandar Ku Mahmood, Zazuli Mohid, Kamaruddin Kamdani (Author)

  333-344

  • Abstract View  263
  • PDF 318

• Optimizing Parameters of End Mill Cutting Tools for Milling Process

  Muhammad Azamuddin Amran, Azriszul Mohd Amin (Author)

  345-357

  • Abstract View  154
  • PDF 121

• Setting Parameters of Control Chart Pattern Classifier for Effective Patterns Recognition

  Muhammad Ammar Abdul Halim, Ibrahim Masood (Author)

  358-365

  • Abstract View  70
  • PDF 153

• Effect of Alkaline Treatment on the Tensile Strength and Hardness of Pineapple Fiber Reinforced Epoxy Resin

  Navinn Vijiyakumar, Mohd Yussni Hashim (Author)

  366-370

  • Abstract View  76
  • PDF 101

• Simulation on Hip Implant Using Finite Element Method

  Amar Reezlan Amar Jauhari, Haslina Abdullah (Author)

  371-377

  • Abstract View  116
  • PDF 156

• Producing a Liquid Soap by Adding Lemon Extract from Used Cooking Oil for Multipurpose Cleaning Use

  Nurul Atiqah Aisyah M. Kamal, Siti Aida Ibrahim (Author)

  378-386

  • Abstract View  1206
  • PDF 726

• Investigation of Entropy Generation in Cooling Tower System

  Muhammad Syafiq Anwar Rizman, Mohamad Farid Sies (Author)

  387-392

  • Abstract View  125
  • PDF 138

• Enhance the Efficiency of the Regenerative Braking System in Electric Vehicles using a Hybrid Energy Storage System

  Muhammad Naseem Azlan Zulkarnian Gafoor, Taha Mohamed Ahmed Sadeq (Author)

  393-409

  • Abstract View  100
  • PDF 247

• Characterization of Raw Kapok Fiber as Filtration Medium for  Biodiesel Plant Waste Oil

  Muhammad Syakir Sanusi, Ashari Kasmin, Rosniza Hussin (Author)

  410-418

  • Abstract View  174
  • PDF 285

• Effect of Reaction Time and Temperature on Biodiesel Production from Vegetable Oil

  Asyiq Hazarith Abu Bakar, Nor Mazlana Main, Nurul Fitriah Nasir (Author)

  419-427

  • Abstract View  197
  • PDF 115

• The Effect of Water Ratio Variation in Soap From Cooking Oil

  Ahmad Sahli Abdol Latif, Siti Aida Ibrahim (Author)

  428-434

  • Abstract View  102
  • PDF 193

• Effect of Varied Degumming Concentrations on Soap from Used Cooking Oil

  Ahmad Hafiz Ahmad Fizar, Siti Aida Ibrahim (Author)

  435-443

  • Abstract View  170
  • PDF 199

• Efficiency Analysis of Full Rotation Counter Flow of Shell and Tube Heat Exchanger using CFD Tool

  Muhammad Na'im Ramli, Norrizal Mustaffa (Author)

  444-451

  • Abstract View  68
  • PDF 97

• The Use of Coconut Fiber as an Enhancer to the Bentonite Water-Based Drilling Fluid

  Mohammad Zahin Azhari Zairil Aznin, Nurasyikin Misdan (Author)

  452-459

  • Abstract View  122
  • PDF 105

• Analysis of Heat Transfer in Shell and Tube Heat Exchanger (STHE) using Counter and Parallel Flow

  Muhammad Danial Aiman Zaidi Mohd Yazid, Nor Mazlana Main (Author)

  460-468

  • Abstract View  341
  • PDF 359

• Exploring the Factors Influencing Road Accidents in Parit Raja: An In-Depth Research Investigation

  Jacqualine Cheah Rigi Gilie, Shafawi Ismail (Author)

  469-477

  • Abstract View  187
  • PDF 300

• Analysis of Vibration in Pipe: Effect from Different Pipe Sizes and Pressure Inlet

  Matilda Stacia Willy, Zuliazura Mohd Salleh (Author)

  478-491

  • Abstract View  82
  • PDF 91

• Failure Mode and Effect Analysis of Buttterfly in UTHM Biodiesel Plant Failure Mode and Effect Analysis

  Amirul Iskandar Borhanoddin, Wan Mohd Wardi Wan Abdul Rahman (Author)

  492-496

  • Abstract View  113
  • PDF 207

• Analysis of Difference Variable Parameter Effect to Temperature Drop: Application of Cooling Tower

  Lizzybel Pawun Uwe, Zuliazura Mohd Salleh (Author)

  497-508

  • Abstract View  96
  • PDF 108

• Flat Cap Atomizer Performance in Filtering Welding Fume

  Muhammad Faiz Azfar Abu Hassan, Mohamad Farid Sies, Ahmad Fakruaiman Anuar (Author)

  508-517

  • Abstract View  72
  • PDF 100

• The Effect of Space Holder Types and Composition on the Properties of Zirconia Foam

  Muhammad Hadi Asmurad, Fazimah Mat Noor, Azzura Ismail (Author)

  518-524

  • Abstract View  51
  • PDF 97

• Development of Metal Foam Characteristics Based on Simulation Method

  Teo Wee Xuan, Zaleha Mohamad (Author)

  525-531

  • Abstract View  55
  • PDF 114

• Tensile and Flexural Properties of Aramid Fiber Composite Laminates

  Muhammad Asyraaf Halim, S Kanna A/L Subramaniyan (Author)

  532-537

  • Abstract View  154
  • PDF 194

• Design and Evaluation of Coronary Artery Stent Geometry Based on Finite Element Analysis

  Muhammad Suhairi As'ari, Al Emran Ismail (Author)

  538-544

  • Abstract View  221
  • PDF 178

• Solar Powered Robot with Solar Tracker

  Abdul Muhaimin Che Rozi, Noormaziah Jafferi (Author)

  545-552

  • Abstract View  194
  • PDF 294

• Modal Analysis of Cantilever Beam with Various Crack Surfaces

  Danavicknesvaran M Sekhar, Zaleha Mohamad (Author)

  553-560

  • Abstract View  115
  • PDF 110

• A Simple Self-Balancing Robot For Educational Purposes

  Noorshaheefa Ahmad Nizam, Normaziah Jafferi (Author)

  561-565

  • Abstract View  99
  • PDF 119

• Analysis of Different Cracked on Cantilever Beam Using Ansys Software

  Mahalechumi Sivaraman, Zaleha Mohamad (Author)

  566-574

  • Abstract View  97
  • PDF 127

• Numerical Analysis of Projectile Impact Towards Flax Plate with Different Orientation

  Pavin Pillai Sathasivam Pillai, Mohd Norihan Ibrahim @ Tamrin (Author)

  575-581

  • Abstract View  75
  • PDF 72

• Failure Analysis of Bolted Connection Subjected to Torsional Loadings

  Susharrman Sai, S Kanna Subramaniyan (Author)

  582-593

  • Abstract View  90
  • PDF 306

• Condition Monitoring of Aircraft Composite Structure using Infrared Thermography

  Muhammad Haziq Mohd Razal, Maznan Ismon (Author)

  594-601

  • Abstract View  118
  • PDF 144

• Fabrication of Alumina-Zirconia Foam Using Foam Replication Method

  Muhammad Akif Azi Rahimee, Fazimah Mat Noor (Author)

  602-609

  • Abstract View  90
  • PDF 98

• To Design a Fire Ball Extinguisher Launcher Attachment to Drone

  Wan Muhammad 'Izzat Ruzain Mohamad Rudi, Abd Khalil Abd Rahim (Author)

  640-617

  • Abstract View  119
  • PDF 365

• Design and Analysis of a Natural Gas-Fueled Flameless Hot Air Generator

  Valarie Kaksing Baraok, Shahrin Hisham Amirnordin, Adam Kasani, Amir Khalid, Mohd Faizal Mohideen Batcha, Mzahar Abd Jalal, Makatar Wae-hayee, Khairul Effendy Ahmad Zainudin (Author)

  618-625

  • Abstract View  83
  • PDF 100

• Adaptation Time Model Based on Difference in Genders

  Muhammad Zahirulhaq Ahmad, Encik Ahmad Fu'ad Idris (Author)

  626-635

  • Abstract View  59
  • PDF 92

• Effect of Thermal and Hydrodynamic Corrosion-Erosion of Solid Particles in Shell and Tube Heat Exchanger

  Nur Dayana Irdina Depikalasben, Normayati Nordin (Author)

  636-640

  • Abstract View  71
  • PDF 112

• Design of Cockle’s Meat Separator Machine Using Cost Based Design Method

  Muhamad Afiq Hassan Nusi, Nik Hisyamudin Muhd Nor (Author)

  641-650

  • Abstract View  59
  • PDF 95

• Design of Cockles Cleaning and Grading Machine Using Cost Based Method

  Muhammad Alim Zakaria, Nik Hisyamudin Muhd Nor (Author)

  651-661

  • Abstract View  109
  • PDF 126

• Aerodynamic Comparison on Different Types of Two-Seater Car Using Ansys CFX

  Nurul Izzati Zulkarnain, Mohammad Kamil Abdullah (Author)

  662-671

  • Abstract View  127
  • PDF 150

• Casing Prototype Design for Portable Electromagnetic Radiation Detector using 3D Printing Technology

  Muhammad Akmal Hanif Azman, Mohd Fahrul Hassan, Syarfa Zahirah Sapuan, See Khee Yee (Author)

  672-679

  • Abstract View  107
  • PDF 139

• Application of Response Surface Method (RSM) to Optimize 3D Printer Process Parameter by using Polylactic Acid (PLA) Material

  Koh Kai Li, Sia Chee Kiong (Author)

  680-691

  • Abstract View  106
  • PDF 218