Vol. 1 No. 1 (2020): RPMME

Articles

• Quantitative Pitting Evaluation Stainless Steel 304 At Cooling Phase By Active Infrared Thermography With Different Target Angle

  Maznan Ismon, Syazwan Haziq Zulkurnain, Suhaimi Hassan

  9-18

  • PDF 289
  • Abstract View  267

• Energy Saving Potential for Tun Fatimah Residential College: A Case Study of UTHM Residential College

  Azian Hariri, Azmil Asraf Hadri

  19-27

  • PDF 928
  • Abstract View  348

• Liquid Fuel Combustion in a Burner System: A Short Review

  Shahrin Hisham Amirnordin, Amir Khalid, Jerome Devan Lourdes Christopher Anthony

  28-37

  • PDF 338
  • Abstract View  239

• Kinematic Behavior of Al2024 T3 Aluminium Plate Subjected to Impact of 7.62mm Bullet

  Mohd Norihan Ibrahim, Mohd Qayyum Hamdani

  38-43

  • PDF 465
  • Abstract View  233

• Calcium Oxide from Waste Shells as Potential Green Catalyst for Biodiesel Production

  Nurul Fitriah Nasir, M. M. Hazri

  44-55

  • PDF 1453
  • Abstract View  705

• Case Study in Evaluation and Performance of Metallic and Polymer Coating as Corrosion Protection In Marine Environment

  Zakiah Kamdi, Mohd Faruq

  56-63

  • PDF 422
  • Abstract View  313

• Design of a Rotating Drum for Electrospinning Setup with Adjustable Speed

  Ching Theng Koh, Ham Wen Jun

  64-68

  • PDF 1483
  • Abstract View  488

• Double Surface Cracks Interaction on Cylindrical Rod Under Tensile and Torsional Loading

  Muhamad Khairudin Awang, M M Hamdan, Al Emran Ismail

  69-77

  • PDF 353
  • Abstract View  228

• Dynamic Response of Al2024 T3 Aluminium Plate Subjected to Oblique Impact of 9mm Bullet Using Single Processor

  Mohd Norihan Ibrahim, Muhammad Ammar Imran Zakaria

  78-84

  • PDF 553
  • Abstract View  310

• Bearing Wear Line Contact Simulation For Lubricated Surfaces

  Muhammad Nizam Naim Tahrin, Akmal Nizam Mohammed

  85-91

  • PDF 433
  • Abstract View  311

• A Review Study of Critical Oxygen Content to Stress Corrosion Cracking of Stainless Steel 304

  Azzura Ismail, Aubergine Trisha Lim

  92-100

  • PDF 415
  • Abstract View  288

• Review of The Effect of Erbium and Neodymium on Microstructure and Mechanical Properties of Magnesium Alloy

  Rosli Ahmad, Muhammad Faez Nor Azman

  101-106

  • PDF 298
  • Abstract View  274

• Effect of Eggshell Waste as Reinforcement on Physical and Mechanical Properties of Recycled Aluminium Chip AA7075: A Review

  Zaleha Mohamad, Muhammad Firdaus Ahmad Daud

  107-114

  • PDF 410
  • Abstract View  251

• Liquid spray characteristics in burner system: A short review

  Shahrin Hisham Amirnordin, Amir Khalid, Tan Yan Hao

  115-125

  • PDF 369
  • Abstract View  269

• Quenching Temperature Monitoring for Hot Press Forming by using Infrared Thermography

  Chuan Huat Ng, Muhamad Fuad Amran

  126-131

  • PDF 352
  • Abstract View  234

• Simulation of Tool Path Using Conventional Method for Milling Application

  Haslina Abdullah, A.M Shafie

  132-138

  • PDF 866
  • Abstract View  405

• Heat Distribution on Abdominal Aorta Having Aneurysm During Hyperthermia Therapeutic

  Norzelawati Asmuin, Lee Jun Xiong, M. Saddam Kamarudin, Aswad Mohammad, Ishkrizat Taib

  139-145

  • PDF 416
  • Abstract View  387

• Material Characterization of Magnesium Elektron ZRE1 Alloy with Praseodymium (Pr) and Erbium (Er) Additions

  Rosli Bin Ahmad, Nadia Farhana Mazlan

  146-152

  • PDF 311
  • Abstract View  218

• Study on Hot Press Forming Die Condition by using Vibration Monitoring System

  Ng Chuan Huat, Adam Arif Suhaimi

  153-159

  • PDF 480
  • Abstract View  312

• Investigation of Mechanical and Physical Properties of Eggshell Reinforced with Different Type of Resin

  Zaleha Mohamad, Muhammad Hakim Roslan

  160-169

  • PDF 1246
  • Abstract View  502

• Monitoring the Sheet Metal Defect of Stamping Process

  Ng Chuan Huat, Zhi Ping Chai

  170-178

  • PDF 588
  • Abstract View  459