Vol. 6 No. 2 (2025): RPMME Vol. 6 No. 2

Impact of Sintering Temperature on Silica Water Filter Fabricated via Cold Isostatic Pressing

Tuan Nur Azleen Amira Tuan Nidzan, Sufizar Ahmad, Muhammad Syahmie Sufi Abdul Shukor

1-9
- PDF 229
- Abstract View 136
Transforming Silica Water Filter Waste into Sustainable Fertiliser

Siti Nuratiqah Syazwana Khairul, Sufizar Ahmad

10-17
- PDF 171
- Abstract View 112
Effect of Composition on the Properties of Silica Foam Produced by Slurry Method

Puteri Nur Syafiqah Nor Zaidin, Sufizar Ahmad

18-26
- PDF 114
- Abstract View 127
Microstructure Analysis of Laser Welded Ferritic Stainless-Steel Interconnect for Solid Oxide Fuel Cell

Anis Syazwani Mohamad Rodzi , Hamimah Abd Rahman , Mohd Faizal Tukimon

27-39
- PDF 129
- Abstract View 147
Innovative Redesign of an Umbrella Using Quality Function Deployment (QFD) and Theory of Inventive Problem Solving (TRIZ)

Muhammad Zakwan Yahaya, Musli Mohammad

40-49
- PDF 152
- Abstract View 280
Bridging the Gap: A Short Review of BSCF Composite Materials for Intermediate Temperature SOFC

Nurul Farhana Abdul Rahman, Hamimah Abd.Rahman, Tan Kang Huai

50-57
- PDF 101
- Abstract View 137
Fabrication and Characterisation of Eutectic Cast Alloy from Aluminium and Copper Wastes

Nor Hasnina Asmat, Nur Azam Badarulzaman

58-65
- PDF 177
- Abstract View 118
Development and Characterization of Magnetic Carbon Foam from Starch and Ferromagnetic Fillers

Muhamad Darwish Abidin Zainal Abidin, Mohamed Nasrul Mohamed Hatta

66-73
- PDF 104
- Abstract View 105

Surface Integrity Study of AISI D2 Steel Using Powder Mixed RBD Palm Oil-Based Dielectric Fluid in Electrical Discharge Machining Process

Muhammad Aliff Nazmi Nordin, Said Ahmad

74-89
- PDF 101
- Abstract View 120
The Evaluation of Machining Time in Drilling Process using Modified Ant Colony Optimization and Conventional Method

Nur Aisah Zaidi, Haslina Abdullah

90-101
- PDF 115
- Abstract View 111
Effect of Polyethylene Glycol (PEG) & Polyvinyl Alcohol (PVA) Concentrations on the Mechanical Behavior and Microstructure of Sintered Hydroxyapatite for Biomedical Use

Mohamad Hafeezudin Mustafa Kamal Pasha, Noor Hakim Rafai

102-110
- PDF 180
- Abstract View 191

Effect of Design of Uniform Packing Characteristic to Improve Cooling Tower Performance

Ahmad Muhaimin Che Mokhtar, Mohamad Farid Sies

111-118
- PDF 171
- Abstract View 120
Fire Safety Assessment at Block G2 FKMP, Universiti Tun Hussein Onn Malaysia

Mohammad Haziq Mohd Samsuri, Shafawi Ismail

119-127
- PDF 167
- Abstract View 215
Analytical Study to Produce The Green Hydrogen Via Wind Energy in Malaysia

Muhamad Amirun Aqil Zainuren, Taha Mohammed Ahmed Sadeq

128-139
- PDF 104
- Abstract View 151

Real-Time Running Performance Analysis and Optimization with YOLOv8-Based AI Vision and Random Forest Classification

Zacky Ar Rizqi, Syariful Syafiq Shamsudin

140-149
- PDF 196
- Abstract View 192
The Flow Characteristic Of Simulation For Newly Developed Disposable Inhaler Spacer Geometry

Nur Dinie Izzati Abdul Rahman, Sofian Mohammad

150-158
- PDF 104
- Abstract View 117

Geometric Influence on Microstructure and Mechanics in Welded A36 Mild Steel

Siti Nur Fareha Mohd Jailani, Kamarul-Azhar Kamarudin

159-165
- PDF 105
- Abstract View 112
Impact Analysis of a Lattice Structure Based Design of Motorcycle Helmet Liners Using Finite Element Modelling

Nagulan Chanthiran, S. Kanna Subramanian

166-176
- PDF 198
- Abstract View 291
The Effect of Naoh for Sugarcane Bagasse Reinforced Alumina Composite to their Mechanical Properties

Nuraina Nazifa Azrul Effendy, Zaleha Mohamad

177-184
- PDF 119
- Abstract View 110
A Machine Learning Framework for Predictive Maintenance of Centrifugal Water Pumps using Remaining Useful Life Estimation

M. Syafiq Syazmir Jamal Nasir, Ramhuzaini Abd Rahman

185-192
- PDF 240
- Abstract View 219
Indoor Air Quality Monitoring through Internet of Things System: A Case Study at UTHM-Fraunhofer IEM Innovation Lab

Shashwar Kumar Ravi, Ramhuzaini Abd. Rahman

193-199
- PDF 122
- Abstract View 178
Field Study of Car Discs Brake Temperature at Highway Exit Using Infrared Thermography

Natesh Kannan, Maznan Ismon

200-207
- PDF 171
- Abstract View 139
Numerical Investigation of Crash Energy Distribution of Lightweight Vehicle at Medium and High-Speed Impacts

Yogendren Subramani, Mohd Norihan Ibrahim

208-216
- PDF 102
- Abstract View 115
Crashworthiness Analysis of Hierarchical Multi-Cell Circular Structures Made of Recycled Aa6061 Aluminium Alloys for Sustainable Automotive Crash Box

Muhammad Rafiuddin Ekhwan, S Kanna Subramaniyan, Susharrman

217-227
- PDF 150
- Abstract View 170
Characterisation of Cassava Peel-Derived Silica at Varied Combustion Temperatures: Identifying the Optimum for Filler Applications

Mohamad Firdaus Dzilikhram Mohamad Fatahiyudin, Kamarul-Azhar Kamarudin

228-236
- PDF 96
- Abstract View 134

CFD Analysis of Empty Fruit Bunch Drying System in Biomass Processing Application

Wan Muzzaffar Amin, Shahrin Hisham Amirnordin, Mohd Faizal Mohideen Batcha, Ahmad Jais Alimin, Shahrul Azmir Osman, Azian Hariri, Amir Khalid, Mohd Faizal Tukimon, Makatar Wae-hayee, Mohammad Faizal Jabbar

237-248
- PDF 151
- Abstract View 163
The Impact of an Upgraded Ventilation System on Thermal Comfort in the Newly Renovated UTHM’s Badminton Hall

Wee Hock Teor, Azian Hariri

249-261
- PDF 145
- Abstract View 117
Advance Modelling and Simulation of Induction Motor Using Matlab: A Comprehensive Approach to Design and Performance Optimization

Mohammad Daniel Faiz Mohd Norrisham, Zamri Noranai

262-267
- PDF 119
- Abstract View 164
Identify the Optimal Sensor Location: Analysis of Flue Gas Behavior in Stack by Using CFD Simulation

Suhazrin Najihah Suaimi, Mohd Azahari Razali, Iman Fitri Ismail, Norfakhira Mohd Nor, Masataro Suzuki, Mohd Azni Md Kassim

268-276
- PDF 164
- Abstract View 173
Design of a Portable Water Purification Flask Using a Mini Diaphragm Pump System

Jonathan Chong Kar Yew, Sia Chee Kiong

277-285
- PDF 144
- Abstract View 137
A Study on Sustainability of a Multipurpose Cooker by Using SolidWorks Sustainability Analysis

Suryana Siraj, Mohd Fahrul Hasan

286-293
- PDF 111
- Abstract View 106
Effect of Reynolds Number on Minor Loss Coefficient of a T-Strainer

Hamzah Fansuri Mohamad Din, Ahmad Fu'ad Idris, Mohd Azwir Azlan

294-302
- PDF 252
- Abstract View 176

Impact of Sintering Temperature on Silica Water Filter Fabricated via Cold Isostatic Pressing

Transforming Silica Water Filter Waste into Sustainable Fertiliser

Effect of Composition on the Properties of Silica Foam Produced by Slurry Method

Microstructure Analysis of Laser Welded Ferritic Stainless-Steel Interconnect for Solid Oxide Fuel Cell

Innovative Redesign of an Umbrella Using Quality Function Deployment (QFD) and Theory of Inventive Problem Solving (TRIZ)

Bridging the Gap: A Short Review of BSCF Composite Materials for Intermediate Temperature SOFC

Fabrication and Characterisation of Eutectic Cast Alloy from Aluminium and Copper Wastes

Development and Characterization of Magnetic Carbon Foam from Starch and Ferromagnetic Fillers

Surface Integrity Study of AISI D2 Steel Using Powder Mixed RBD Palm Oil-Based Dielectric Fluid in Electrical Discharge Machining Process

The Evaluation of Machining Time in Drilling Process using Modified Ant Colony Optimization and Conventional Method

Effect of Polyethylene Glycol (PEG) & Polyvinyl Alcohol (PVA) Concentrations on the Mechanical Behavior and Microstructure of Sintered Hydroxyapatite for Biomedical Use

Effect of Design of Uniform Packing Characteristic to Improve Cooling Tower Performance

Fire Safety Assessment at Block G2 FKMP, Universiti Tun Hussein Onn Malaysia

Analytical Study to Produce The Green Hydrogen Via Wind Energy in Malaysia

Real-Time Running Performance Analysis and Optimization with YOLOv8-Based AI Vision and Random Forest Classification

The Flow Characteristic Of Simulation For Newly Developed Disposable Inhaler Spacer Geometry

Geometric Influence on Microstructure and Mechanics in Welded A36 Mild Steel

Impact Analysis of a Lattice Structure Based Design of Motorcycle Helmet Liners Using Finite Element Modelling

The Effect of Naoh for Sugarcane Bagasse Reinforced Alumina Composite to their Mechanical Properties

A Machine Learning Framework for Predictive Maintenance of Centrifugal Water Pumps using Remaining Useful Life Estimation

Indoor Air Quality Monitoring through Internet of Things System: A Case Study at UTHM-Fraunhofer IEM Innovation Lab

Field Study of Car Discs Brake Temperature at Highway Exit Using Infrared Thermography

Numerical Investigation of Crash Energy Distribution of Lightweight Vehicle at Medium and High-Speed Impacts

Crashworthiness Analysis of Hierarchical Multi-Cell Circular Structures Made of Recycled Aa6061 Aluminium Alloys for Sustainable Automotive Crash Box

Characterisation of Cassava Peel-Derived Silica at Varied Combustion Temperatures: Identifying the Optimum for Filler Applications

CFD Analysis of Empty Fruit Bunch Drying System in Biomass Processing Application

The Impact of an Upgraded Ventilation System on Thermal Comfort in the Newly Renovated UTHM’s Badminton Hall

Advance Modelling and Simulation of Induction Motor Using Matlab: A Comprehensive Approach to Design and Performance Optimization

Identify the Optimal Sensor Location: Analysis of Flue Gas Behavior in Stack by Using CFD Simulation

Design of a Portable Water Purification Flask Using a Mini Diaphragm Pump System

A Study on Sustainability of a Multipurpose Cooker by Using SolidWorks Sustainability Analysis

Effect of Reynolds Number on Minor Loss Coefficient of a T-Strainer

Make a Submission

info

proceedings

index