Ammoniacal Nitrogen and COD Removal Using Zeolite-Feldspar Mineral Composite Adsorbent
Keywords:Zeolite, Feldspar, Composite, Adsorbent
AbstractThe vigorous combination ofÂ waste in landfill recognized as potential hazard source, but one distinctive problem associated with landfill is leachate. Zeolite is known as good adsorbent but the cost is relatively high. Feldspar is the most abundant mineral group in the world, forming around 60% of the earthâ€™s crust. Due to its availability, feldspar becomes one of low cost materials.Â Feldspar and zeolite is combining as an composite adsorbent in this study where there optimum ratio between this material is determined. The experimentcarried out in a series of 250 mL conical flask with varied amount of media ratioÂ shaken for 5 hours with 200 rpm shaking speed and at pH 7. The best ratio of feldspar and zeoliteÂ chosen is 1:1 according to the adsorption behavior of organic constituent (COD) and ammoniacal nitrogen (NH3-N) to the media. The value of the removal percentage of COD andÂ NH3-N isÂ 49% and 45% respectively and theÂ uptakeÂ capacity for both contaminant is 50.14 mg/gÂ and 8.06mg/g respectively. Â The usage of feldsparÂ will significantly reducing zeolite usage conventionally and consequently decresing the operational cost in leachate treatments
Download data is not yet available.
How to Cite
Ibrahim, F. N. D., Daud, Z., Abdul Latiff, A. A., Ridzuan, M. B., Ahmad, Z., Awang, H., & Marto, A. (2017). Ammoniacal Nitrogen and COD Removal Using Zeolite-Feldspar Mineral Composite Adsorbent. International Journal of Integrated Engineering, 8(3). Retrieved from https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/1478
Issue on Civil and Environmental Engineering
Open access licenses
Open Access is by licensing the content with a Creative Commons (CC) license.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.